Rent - Sell - Installation - Consulting - Traffic Control Plans

B.C. Cannon Company, Inc.

Click here to edit subtitle

Barricades

B.C. Cannon Company is the regional distributor for Plasticade products! We offer a variety of barricades and other items, all designed with your safety in mind. We assemble the products in house for your convenience and also offer setup and removal of the barricades on your job site. 

In addition to the items listed below we carry all kinds of barricades to meet your safety needs.

Angle Iron Type III

  • Angle Iron Uprights are 10 gauge, galvanized  steel
  • Uprights contain holes for boards 11/32" and holes for lights 9/16"
  • Feet are 10 gauge steel, mill finish
  • Plastic 1" x 8" boards are available in 4', 6', 8', 10', and 12' lengths
    • reflective sheeting on one or both sides, or none
  • Quick removal of uprights from feet
    • allows for short term or permanent placement
  • Easy to asssemble and replace parts if necessary
  • Accepts two flashing lights
  • Sold in kits or as component parts
  • Dimensions: Uprights - 1.5" x 1.5" x 63", Feet - 1.5" x 1.5" x 60", Riser 6"
  • NCHRP-350 Accepted, Meets MUTCD Standards

Telespar Type III

Two Options Available

Telespar® uprights with Telespar® feet
Telespar® uprights with Angle Iron feet

  • Telespar® is galvanized for superior corrosion protection,14 gauge, hot rolled high carbon steel
  • Angle iron feet are 10 gauge, mill finish
  • Universal mounting holes, pre-punched 7/16”
  • Square shape provides superior wind load capabilities and inhibits warping
  • Quick removal of uprights from feet, allows for short term or permanent placement
  • Easy to assemble and replace parts if necessary
  • Plastic 1" x 8" boards  are available in 4’, 6’, 8’, 10’, and 12’ lengths
  • Boards may be sheeted (on one or both sides) or unsheeted
  • Telespar uprights are available in both 60" and 63" lengths
  • Accepts two flashing lights
  • Sold in kits or as component parts
  • NCHRP-350 Accepted, Meets MUTCD Standards

Sentinel Type III

  • Base consists of 2 pieces, upright and base, that snap together, no hardware required.
  • Available with two board lengths, 1" x 8" boards, 4' or 6' long
  • Boards can be purchased sheeted (on one or both sides) or unsheeted
  • Base can be internally ballasted with sand, sandbags, or water in warmer climates
  • NCHRP-350 Accepted, Meets MUTCD Standards

The Sentinel snaps together for your convenience, no hardware needed!

Break Away Type III

  • All plastic
  • Collapsible, lies flat for storage and transport
  • Available with five board lengths, 1"x 8" boards, 4', 6'. 8', 10', or 12' long
  • Easier to transport, install, and store than wood or steel Type III Barricades
  • Boards are available sheeted (one or both sides) or unsheeted
  • Attach two flashing lights
  • Barricades are sold in kits with hardware included or as component parts
  • NCHRP-350 Accepted, Meets MUTCD Standards

Break Away Type III folds for easy storage and transport!

Combocade type I & II

Replaceable components save you money!

  • Boards can be replaced 
  • Legs can be replaced or repaired

Standard 45” steel legs, 14 gauge thickness, galvinized

Plastic boards last longer than wood!

  • Injection molded boards are strong and dense, reinforced with our “diamond” design
  • Boards will not bend, warp, crack, splinter, or peel
  • Available in 24”W x 12”, 8”, or 6”H
  • Names can be stenciled on the boards for identification

No drilling – save labor!

  • Bolt holes are molded into the plastic boards, making board replacement   quick and easy

NCHRP-350 Accepted,  Meets MUTCD Standards

Econocade Type I & II

  • All plastic, economical barricade, that is strong and durable
  • Solid wall design: legs and boards are molded in one piece
  • Easy to handle, pack, and transport
  • Available in a variety of colors
  • Rust free and impact resistant
  • Names can be stenciled on the barricade for identification
  • NCHRP-350 Accepted, Meets MUTCD Standards

Fibercade Type I & II

  • All plastic barricade with a "double wall" design for strength and rigidity
  • Built from component parts, legs and boards, assuring easy replacement of damaged parts
  • Boards are available in three sizes (12"x24", 8"x24", 3"x24")
  • Bottom board can carry a 35 lb. sandbag
  • Two flashing light mounting receptacles
  • Names can be stenciled on the barricade for identification
  • NCHRP-350 Accepted, Meets MUTCD Standards

Plasticade Type I & II

  • All plastic and maintenance free, never rusts, needs painting, or leg straightening
  • Molded hollow so it can be internally ballasted with up to 10 lbs. of dry sand
  • Molded handles with mounting holes for attaching flashing lights
  • Features “click lock” hinges for a positive interlock in the open position
  • Sandbag bar (if additional weight is required) 
  • Stacking lugs keep stacked units from sliding
  • Names can be stenciled on the barricade for identification
  • NCHRP-350 Accepted, Meets MUTCD Standards

Dimensions: 25"W x 45"H

Weight: 16 lbs.

Barricade Lights

 
 

Incandescent Lights

  • Upper case design eliminates the need for the rubber neck ring.
  • Hi-Impact polypropylene - UV stabilized
  • Moisture proof circuit using the latest state of the art electronic components
  • Reverse polarity protected
  • Available in flashing or steady burn 6 or 12 volt with or without photo electric switch
  • Standard flash rate in 65+/- 10 FPM and on time is a minimum of 10% of the flash cycle
  • Special purpose circuits with various flash rates and on times are available upon request.

Solar Assist

Internal solar panels trickle charge "D" cell Alkaline batteries to give a superior long lasting more reliable power source. 

Model 400 ADA Audible Device

  • The 400ADA is an audible information device that can be mounted on various safety devices like the Safety Wall or can just be a stand-alone device.

  • Easily program your message with built-in microphone and speaker.

  • Record up to a 60 second message.

  • Customize message for each location.

  • When routes are blocked (especially mid-block closings), there are alternate crossings or alternate routes that are not continuous, these units provide positive guidance for the visually impaired by providing needed audible information.  See 2009 MUTCD Section 6D.01 E, Section 6D.02, Section 6F.14, Section 6F.16 and notes on Figure 6H-28 and Figure 6H-29

  • Unit is self contained and operates on four D-Cell batteries.

  • Unit is triggered by motion detector when pedestrians get within 15 feet of the unit.